- MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
- Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
- 2-hole 4 in installation
- High-arc pull-down swivels 360degrees
- 1.8 gpm at 60 psi, 6.8 L/min at 414 kPa
- Control mechanism shall be the diamond coated ceramic cartridge
- Control shall return to neutral position when faucet is turned off
- Finished handle button with red/blue graphics to indicate hot/cold temperature
- Integral double check valves in sprayer assembly
- Disposable hose lead to aid installation
- 3/8 in OD straight, staggered pex supply tubes - 36 3/4 in (934 mm) and 37 3/4 in (959 mm) L
- Verified compliant with 0.25% weighted average Pb content regulations
DELTA® Pull-Down Bar/Prep Faucet, Collection: Leland®, 1.8 gpm, High-Arc Spout, 6-11/16 in Spout Reach, 14 in Spout Height, 1 Handles, 2 Faucet Holes, 1-3/8 in Faucet Hole, 3/8 in, Compression, 2-1/2 in Maximum Deck Thickness, Deck Mount, Diamond™ Seal Valve/Cartridge, Zinc, Venetian Bronze, Domestic
-
Collection: Leland®
-
Collection: Leland®
-
No. of Handles: 1
-
No. of Faucet Holes: 2
-
Number Of Handles: 1
-
Handle Type: Lever
-
Spout Type: High-Arc
-
Spout Reach: 6-11/16 inch
-
Spout Reach: 6-11/16 in
-
Spout Height: 7-7/16 inch
-
Spout Height: 14 in
-
Spout Overall Height: 14 inch
-
Faucet Connection: 3/8 inch O.D. Compression Fittings
-
Valve Type: Diamond™ Seal Valve
-
Flow Rate: 1.8 gpm
-
Flow Rate: 1.80 gpm at 60 psi
-
Faucet Centers: 4 inch
-
Material: Brass
-
Material: Zinc
-
Finish: Venetian® Bronze
-
Handles Included: Yes
-
Max. Deck Thickness: 2-1/2 inch
-
Required Hole Diameter: 1-3/8 inch
-
Maximum Deck Thickness: 2-1/2 in
-
Side Spray Included: No
-
ADA Compliant: Yes
-
Faucet Hole Size: 1-3/8 in
-
Faucet Hole Size: 1-3/8 inch
-
Low Lead Compliant: Yes
-
Pull-out/Pull-down: Yes
-
Standards: ASME A112.18.1, A112.18.6, CSA B125.1